When you wash the filter with water, it’s vital that you allow at least 24 hours for it to fully dry before re-inserting it in the filter housing..

Here’s a guide to doing just that – and it only takes a few minutes!.This method should also work for the Vax Blade 2 and 3.

You can use a similar method for the.Vax Blade Pro 32V., although you should check for any differences in the manual instructions.. What You’ll Need.

Coin to unlock the brush bar.Do not use water, a wet cloth, or any cleaning products for the process below..

Step 1: Remove The Floorhead.

Before you start trying to clean the Vax Blade 4 brush bar, it’s best to remove the floorhead from the machine.Use a small pair of scissors to cut away hair that’s become tangled around the brush bar.

There is a groove along one side of the brush which you can run your scissors along.Once the hair has been cut, pull it away from the brush by hand.. (Optional) Wipe away dirt and grime with a damp cloth.

If you want to give the brush a more thorough clean, use a damp, soft cloth to wipe away dirt (avoid cleaning products or detergents – just use plain water).Make sure that the brush is completely dry before re-inserting it into the vacuum though, otherwise more dirt will instantly stick to it.. Re-insert the brush bar into the vacuum.. You’ll need to insert the end of the brush opposite the side with the button first.